Let’s Protect

Your Investment

the Bare Necessities™

Wood Conditioning Method

Chef applying Papa Bear Wood Wax™

Your handcrafted board deserves care that’s as thoughtful as its construction. Here’s how to keep it looking beautiful and performing at its best for years to come—no shortcuts, no warping, and definitely no dishwashers.

🧼 After Each Use

1. Wash Gently
Use mild soap (or a cutting board-specific formula) and warm water. Scrub thoroughly, but skip the soak.

2. Dry Immediately
Pat dry with a clean towel. Don’t air dry—moisture left sitting can lead to warping or cracking.

3. Rehydrate with Cutting Board Oil
Lightly apply a food-safe oil to keep the wood nourished. Follow the product’s instructions, and don’t skip this step—hydrated wood resists cracking and staining.

4. Seal with Cutting Board Wax
Lock in that moisture and add a protective finish using a high-quality board wax.
We recommend Papa Bear Wood Wax™—it’s part of our Bare Necessities™ method and trusted in every All*En Crafts™ finish.

🔧 Additional Tips from the Bench

• No Soaking. Ever.
Avoid soaking or putting your board in the dishwasher. Water and heat are wood’s worst enemies.

• Routine Conditioning
Regularly apply food-grade mineral oil or a designated conditioner to maintain peak performance and appearance.

• Even Out Knife Marks
Alternate cutting sides to reduce wear. For deeper grooves, sand lightly with fine-grit sandpaper and follow up with oil and wax to restore the finish.

• Odor Control
To freshen up, rub with coarse salt and a cut lemon. Rinse and dry thoroughly—it’s nature’s reset button.

• Need a Little Extra Help?
If your well-loved board needs more than just routine care, check out our Bear Necessities™ Resurfacing Service—we’ll help bring it back to life.

All*En Craft Mape proofing board

Flour Power: Caring for Your Proofing Board

Flour, Not Finish: These Boards Need to Stay Natural.

All*En Crafts™ proofing boards are dual-finished for maximum versatility. The sealed side takes the same care as any of our cutting boards—wash, dry, oil, and wax as described above.

But the natural side? That’s a different story. It’s left unfinished and lightly polished to work with flour, not against it. It helps dough rise just right—and it needs to stay that way. No oils, no waxes, no water soaks. Just a light dusting of semolina and a gentle wipe-down after each use.

Use & Care for the Natural Side

The natural side of your All*En Crafts™ proofing board is left unfinished on purpose—no oils, waxes, or sealants—so it can breathe and support the perfect rise. It was carefully sanded to a silky-smooth 220 grit, then hand-polished with semolina flour to create a surface that’s both functional and beautiful.

That soft, flour-polished finish gives dough just the right amount of grip and glide, helping it form structure without sticking.

To keep it working beautifully:

  • Use flour, not oil. Lightly dust the natural side with semolina, bread flour, or your preferred dusting agent before placing your dough. This keeps the surface naturally non-stick without sealing the wood.

  • After use, gently wipe. Use a dry cloth or bench scraper to remove flour and dough bits. If needed, a slightly damp cloth can help—but never soak the board or use soap on this side.

  • No oil, no wax. Sealing the surface will interfere with dough performance. Keep it natural.

  • Let it breathe. Store your board standing upright to prevent warping and allow air to circulate on both sides.

Refresh as needed:
If the surface ever feels too slick or glazed, lightly scuff with fine (220-grit) sandpaper, then re-polish with a fresh dusting of semolina. Your board will thank you.

  • It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world.

  • It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world.

  • It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world.

Subscribe

Subscribe